shipping charges included on all products
Ash Veneered USMC Skull Plaque
Ash Veneered USMC Skull Plaque
$130.00

Ash Veneered USMC Skull Plaque

10" x 15" plaque with quarter sawn ash veneer on a 1/2" MDF core with solid hardwood sides, painted black. Plaques are vacuumed pressed and have a balance veneer (woods vary) to prevent bowing. Painted side pieces are protected by an acrylic varnish and ash veneer is finished with a satin lacquer. Plaques include an acid-free paper backing, sawtooth hanging hardware, and bump ons. 

All pieces of the design are 1/32”thick acrylic that are laser cut and placed by hand. The skull design is a dual layer piece from modified artwork by XonkArts. Customizable areas include a 40 character limit above skull, start and end dates (dd mmm yyyy), and name. Rank and chevrons are dictated by selection.

A 3.75" x 3.75"  1/16” thick placard for up to 500 characters is also included. The placard is dual colored and has a black face and white base which shows when engraved. Text formatting for this placard is typically justified and font size, tracking, and leading will be adjusted for best visual appearance.

Although shown with a piece of loop velcro that is meant to attach a unit patch, this area can be left blank for other uses. 

Plaques can be customized. Please contact me for more information. 

Images are examples only.

 Official Hobbyist of the USMC; License Number 20306

Skull plaques require a two week lead time. Rush orders are available for an additional $20 for less than 2 weeks notice and $40 for less than a weeks notice. 

DESCRIPTION

10" x 15" plaque with quarter sawn ash veneer on a 1/2" MDF core with solid hardwood sides, painted black. Plaques are vacuumed pressed and have a balance veneer (woods vary) to prevent bowing. Painted side pieces are protected by an acrylic varnish and ash veneer is finished with a satin lacquer. Plaques include an acid-free paper backing, sawtooth hanging hardware, and bump ons. 

All pieces of the design are 1/32”thick acrylic that are laser cut and placed by hand. The skull design is a dual layer piece from modified artwork by XonkArts. Customizable areas include a 40 character limit above skull, start and end dates (dd mmm yyyy), and name. Rank and chevrons are dictated by selection.

A 3.75" x 3.75"  1/16” thick placard for up to 500 characters is also included. The placard is dual colored and has a black face and white base which shows when engraved. Text formatting for this placard is typically justified and font size, tracking, and leading will be adjusted for best visual appearance.

Although shown with a piece of loop velcro that is meant to attach a unit patch, this area can be left blank for other uses. 

Plaques can be customized. Please contact me for more information. 

Images are examples only.

 Official Hobbyist of the USMC; License Number 20306

LEAD TIMES AND SHIPPING

Skull plaques require a two week lead time. Rush orders are available for an additional $20 for less than 2 weeks notice and $40 for less than a weeks notice. 

+

Only left in stock